Nye nettsider

Vi jobber fremdeles med forbedringer på våre nye nettsider. For å kjøpe standarder eller legge til i abonnement må du logge på gamle nettsider (siden du er på nå) med gammelt brukernavn og passord.

 

NS-EN ISO 15874-3:2003

NOK 673,00 (eks. mva) InformationOvervåk standarden
basket Skriv ut på papir basket Trykket og innbundet
Få nettbasert tilgang
Status: Alert Tilbaketrukket
Norsk tittel: Rørledninger av plast for kaldt- og varmtvannsinstallasjoner — Polypropylen (PP) — Del 3: Rørdeler (ISO 15874-3:2003)
Engelsk tittel: Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings (ISO 15874-3:2003)
Varetype: Standard
Språk: Engelsk
Utgave: 2003-12 (2004-02-10)
Erstattes av: NS-EN ISO 15874-3:2013 Check Gyldig
Pris:

NOK 673,00 (eks. mva)
NOK 841,25 (ink. mva)

Inkludert i: NS ICS 83.140
NS ICS 91 - Bygningsmaterialer og bygging
NS ICS 91.140
NS ICS 91.140.60
NS ICS 83
NS ICS 83.140.30
Omfang: ISO 15874-3:2003 specifies the characteristics of fittings for polypropylene (PP) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under design pressures and temperatures appropriate to the class of application.
It covers a range of service conditions (application classes) and design pressure classes. It does not apply if the values of the design temperature, maximum design temperature and malfunction temperature are in excess of those given in ISO 15874-1.
It also specifies the parameters for the test methods referred to in this standard.
In conjunction with the other parts of ISO 15874, it is applicable to fittings made from PP and to fittings, made from other materials, intended to be fitted to pipes conforming to ISO 15874-2 to give joints conforming to the requirements of ISO 15874-5.
It is also applicable to fittings made from alternative materials which, when fitted to pipes conforming to ISO 15874-2, give joints conforming to the requirements of ISO 15874-5.
It is applicable to fittings of the following types:
socket fusion fittings
electrofusion fittings
mechanical fittings
fittings with incorporated inserts.
Komité: SN/K 084
Fastsatt: 2004-02-10
Tilbaketrukket: 2013-05-01
ICS: 83.140.30 - Plastrør, - deler og -ventiler
23.040.45 - Rørdeler av plast
91.140.60 - Vannforsyningssystemer