Nye nettsider

Vi jobber fremdeles med forbedringer på våre nye nettsider. For å kjøpe standarder eller legge til i abonnement må du logge på gamle nettsider (siden du er på nå) med gammelt brukernavn og passord.

 

NEK EN 62232:2017

Standard
NOK 3 438,00 (eks. mva) InformationOvervåk standarden
basket Skriv ut på papir basket Trykket og innbundet
Få nettbasert tilgang
Status: Check Gyldig
Norsk tittel: Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
Engelsk tittel: Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
Varetype: Standard
Språk: Engelsk
Utgave: 2017-12 (2018-01-01)
Erstatter: NEK EN 50492:2008 Check Gyldig
NEK EN 50383:2010 Check Gyldig
NEK EN 50400:2006 Check Gyldig
NEK EN 50400:2006/A1:2012 Check Gyldig
NEK EN 50383:2010/AC:2013 Check Gyldig
NEK EN 50400:2006/AC:2011 Check Gyldig
NEK EN 50492:2008/A1:2014 Check Gyldig
Erstattes av: NEK EN IEC 62232:2022 Check Gyldig
Antall sider: 252
Pris:

NOK 3 438,00 (eks. mva)
NOK 4 297,50 (ink. mva)

Omfang: IEC 62232:2017(E) provides methods for the determination of radio-frequency (RF) field strength and specific absorption rate (SAR) in the vicinity of radiocommunication base stations (RBS) for the purpose of evaluating human exposure. This document: - considers intentionally radiating RBS which transmit on one or more antennas using one or more frequencies in the range 110 MHz to 100 GHz; - considers the impact of ambient sources on RF exposure at least in the 100 kHz to 300 GHz frequency range; - specifies the methods to be used for RF exposure evaluation for compliance assessment applications, namely:    - product compliance - determination of compliance boundary information for an RBS product before it is placed on the market;    - product installation compliance - determination of the total RF exposure levels in accessible areas from an RBS product and other relevant sources before the product is put into service;    - in-situ RF exposure assessment – measurement of in-situ RF exposure levels in the vicinity of an RBS installation after the product has been taken into operation; - describes several RF field strength and SAR measurement and computation methodologies with guidance on their applicability to address both the in-situ evaluation of installed RBS and laboratory-based evaluations; - describes how surveyors, with a sufficient level of expertise, establish their specific evaluation procedures appropriate for their evaluation purpose; - provides guidance on how to report, interpret and compare results from different evaluation methodologies and, where the evaluation purpose requires it, determine a justified decision against a limit value and - provides short descriptions of the informative example case studies given in the companion Technical Report IEC TR 62669 [1] This second edition cancels and replaces the first edition published in 2011 and constitutes a technical revision.
Komité: NEK/NK106
Fastsatt: 2018-01-01
ICS: 13.280 - Strålevern
17.240 - Måling av stråling